LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2009 >> LS 460L RWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Windshield/WINDOWGLASS >> Windshield Deicer System >> Terminals Of Ecu
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Terminals Of Ecu

  1. CHECK FRONT LIGHT ECU (FRONT CONTROLLER) 
    Fig 1: Identifying Front Controller Connectors Terminals
    G05776777Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Measure the resistance and voltage according to the value (s) in the table below.
      RESISTANCE AND VOLTAGE REFERENCE CHART

      Terminal No. (Symbols) Wiring Color Terminal Description Condition Specified Condition
      A52-1 (BATB) - A50-2 (E) P - W-B Power source Always 11 to 14 V
      A52-5 (ALTB) - A50-2 (E) L - W-B Power source Always 11 to 14 V
      A50-1 (FMB3) - A50-2 (E) LG - W-B Power source Always 11 to 14 V
      A50-2 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω
      A51-13 (FDEF) - A50-2 (E) L - W-B Deicer relay Engine switch on (IG) Windshield deicer switch ON Below 1 V
      Engine switch on (IG) Windshield deicer switch OFF 11 to 14 V
      A50-5 (FMIG) - A50-2 (E) Y - W-B Power source Engine switch on (IG) 11 to 14 V
      Engine switch off Below 1 V

      If the result is not as specified, the front light ECU (front controller) or fuse may have a malfunction.

  2. CHECK AIR CONDITIONING AMPLIFIER 
    Fig 2: Identifying L76 And L77 Air Conditioning Amplifier Connector Terminals
    G05776767Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the L76 and L77 air conditioning amplifier connectors.
    2. Measure the resistance and voltage according to the value (s) in the table below.
      RESISTANCE AND VOLTAGE REFERENCE CHART

      Terminal No. (Symbols) Wiring Color Terminal Description Condition Specified Condition
      L76-5 (IG+) - L76-1 (GND) V - W-B Ignition power supply Engine switch on (IG) 11 to 14 V
      Engine switch off Below 1 V
      L76-6 (+B1) - L76-1 (GND) L - W-B Battery power source Always 11 to 14 V
      L76-7 (+B2) - L76-1 (GND) L - W-B Battery power source Always 11 to 14 V
      L76-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
      L76-2 (FGND) - Body ground W-B - Body ground Ground Always Below 1 Ω
      L77-6 (RGND) - Body ground W-B - Body ground Ground Always Below 1 Ω

      If the result is not as specified, there may be a malfunction on the wire harness side.

  3. CHECK MULTI-DISPLAY 
    Fig 3: Identifying L59 Multi-Display Connector Terminals
    G04950361Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the L59 multi-display connector.
    2. Measure the resistance and voltage according to the value (s) in the table below.
      RESISTANCE AND VOLTAGE REFERENCE CHART

      Terminal No. (Symbols) Wiring Color Terminal Description Condition Specified Condition
      L59-1 (+B1) - L59-10 (GND1) R - W-B Battery power source Always 11 to 14 V
      L59-3 (IG) - L59-10 (GND1) V - W-B Ignition power supply Engine switch off Below 1 V
      Engine switch on (IG) 11 to 14 V
      L59-10 (GND1) - Body ground W-B - Body ground Ground Always Below 1 Ω

      If the result is not as specified, there may be a malfunction on the wire harness side.

  4. CHECK INTEGRATION CONTROL AND PANEL (w/o Multi-display) 
    Fig 4: Identifying L35 Integration Control And Panel Connector Terminals
    G04950362Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the L35 integration control and panel connector.
    2. Measure the resistance and voltage according to the value (s) in the table below.
      RESISTANCE AND VOLTAGE REFERENCE CHART

      Terminal No. (Symbols) Wiring Color Terminal Description Condition Specified Condition
      L35-1 (+B1) - L35-10 (GND1) B - W-B Battery power source Always 11 to 14 V
      L35-3 (IG) - L35-10 (GND1) V - W-B Ignition power supply Engine switch off Below 1 V
      Engine switch on (IG) 11 to 14 V
      L35-10 (GND1) - Body ground W-B - Body ground Ground Always Below 1 Ω

      If the result is not as specified, there may be a malfunction on the wire harness side.

scientia non olet · About LEMON Manuals