Camshaft Oil Control Valve: Removal

REMOVE COWL TOP VENTILATOR LOUVER RH (See REMOVAL )
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTE: After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
REMOVE V-BANK COVER SUB-ASSEMBLY (See REMOVAL )
REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY (See REMOVAL )
REMOVE NO. 1 AIR CLEANER INLET (See REMOVAL )
REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1)
1. Disconnect the camshaft timing oil control valve connector.
2. Remove the bolt and camshaft timing oil control valve.
3. Remove the O-ring from the camshaft timing oil control valve.
Fig 1: Locating Camshaft Timing Oil Control Valve Connector With Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2)
1. Disconnect the camshaft timing oil control valve connector.
2. Remove the bolt and camshaft timing oil control valve.
3. Remove the O-ring from the camshaft timing oil control valve.
Fig 2: Locating Camshaft Timing Oil Control Valve Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002