Service Data
Brake Pedal
BRAKE PEDAL SERVICE DATA
| Brake pedal height from tibia pad BR-15 |
144.2 to 154.2 mm (5.68 to 6.07 in.) |
| Stop light switch protrusion BR-15 |
1.5 to 2.6 mm (0.059 to 0.102 in.) |
| Brake pedal free play BR-16 |
1.0 to 2.0 mm (0.0394 to 0.0787 in.) |
| Brake pedal reserve distance from tibia pad < Depressing force: 200 N (20 kgf, 45.0 lbf) > BR-16 |
More than 95 mm (3.74 in.) |
Brake Master Cylinder
BRAKE MASTER CYLINDER SERVICE DATA
| Item | Tester Connection | Condition | Specified Condition |
|---|---|---|---|
| Brake fluid level warning switch BR-28 |
1 - 2 | Float up (Switch OFF) | 1.84 to 2.16 kΩ |
| Float down (Switch ON) | Below 1 Ω |
BRAKE MASTER CYLINDER SERVICE DATA
| Master cylinder push rod clevis length BR-35 |
122.1 to 123.1 mm (4.807 to 4.846 in.) |
| Hose clip position from the reservoir connector BR-37 |
4.0 to 7.0 mm (0.158 to 0.276 in.) |
Front Brake
FRONT BRAKE SERVICE DATA
| Pad lining thickness BR-47 |
Standard | 13.5 mm (0.532 in.) |
| Minimum | 1.0 mm (0.0394 in.) | |
| Disc thickness BR-48 |
Standard (13.14 inch disc) | 30.0 mm (1.181 in.) |
| Standard (14.06 inch disc) | 34.0 mm (1.339 in.) | |
| Minimum (13.14 inch disc) | 27.0 mm (1.063 in.) | |
| Minimum (14.06 inch disc) | 31.0 mm (1.221 in.) | |
| Disc runout BR-48 |
Maximum | 0.04 mm (0.0016 in.) |
Front Disc Identification
FRONT DISC IDENTIFICATION REFERENCE CHART
| Item | Identification mark |
|---|---|
| LH BR-50 |
L |
| RH BR-50 |
R |
Rear Brake
REAR BRAKE SERVICE DATA
| Pad lining thickness BR-62 |
Standard | 13.5 mm (0.532 in.) |
| Minimum | 1.0 mm (0.0394 in.) | |
| Disc thickness BR-62 |
Standard (12.40 inch disc) | 20.0 mm (0.787 in.) |
| Standard (13.19 inch disc) | 22.0 mm (0.866 in.) | |
| Minimum (12.40 inch disc) | 18.0 mm (0.709 in.) | |
| Minimum (13.19 inch disc) | 20.0 mm (0.887 in.) | |
| Disc runout BR-63 |
Maximum | 0.04 mm (0.0016 in.) |
Rear Disc Identification
REAR DISC IDENTIFICATION REFERENCE CHART
| Item | Identification mark |
|---|---|
| LH BR-65 |
L |
| RH BR-65 |
R |