Map Light Assembly: Removal

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE MAP LIGHT ASSEMBLY
1. Using a screwdriver, detach the 2 claws and open the 2 covers
  HINT:
  
  Tape the screwdriver tip before use.
  
  Fig 1: Identifying Map Light Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 screws.
  
  Fig 2: Locating Map Light Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using a molding remover, detach the 2 clips.
4. Disconnect the connectors and remove the map light.