Inspection Procedure

HINT:

If the navigation type is NAVIGATION SYSTEM (for HDD), "multi-display" refers to the "display and navigation assembly".

1. CHECK SURROUNDING CONDITION 
   1. Check if the cellular phone can make calls in a certain location

      OK: It can make calls. 

   NG: END (CELLULAR PHONES CAN ONLY FUNCTION IN CELLULAR SERVICE AREAS) 

   OK: Go to next step 

2. CHECK RECEPTION 
   1. Enter the "Information" screen by pressing the "INFO" switch.
   2. Select "Telephone"
      Fig 1: Screen Display - Telephone

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   3. Check the "BT" mark.

      Result 

      RESULT CHART
      
      

      Result	Proceed to
      Yellow color	A
      Blue color (w/ Navigation System [for HDD])	B
      Blue color (w/ Navigation System [for DVD])	C
      Blue color (w/o Navigation System)	D
      No connection mark is displayed	E

      Fig 2: Screen Display - BT Mark

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   B: REPLACE DISPLAY AND NAVIGATION ASSEMBLY  (see REMOVAL )

   C: REPLACE MULTI-DISPLAY  (see REMOVAL )

   D: REPLACE MULTI-DISPLAY  (See REMOVAL  )

   E: SELECT REGISTERED CELLULAR PHONE OR REGISTER "BLUETOOTH" COMPATIBLE PHONE 

   A: BRING CELLULAR PHONE TO LOCATION WHERE BT MARK TURNS BLUE