Inspection Procedure

HINT:

After the inspection is completed, clear the DTCs.

1. CHECK DISC 
   1. Check that the disc is not deformed or cracked.

      OK: No deformation or cracks on the disc. 

   NG: REPLACE DISC 

   Fig 1: Precaution For Disc

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   OK: Go to next step 

2. DISC CLEANING 
   1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
      NOTE: Do not use a conventional record cleaner or antistatic preservative.
      Fig 2: Cleaning Disc With Soft Cloth

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. CLEAR DTC 
   1. Clear the DTC (see DTC CHECK / CLEAR  )
4. RECHECK DTC 
   1. Recheck DTCs and check if the same trouble occurs again.

      OK: Malfunction disappears. 

   NG: Go to step 5 

   OK: USE SIMULATION METHOD TO CHECK  (See ELECTRONIC CIRCUIT INSPECTION PROCEDURE )

5. REPLACE DISC WITH ANOTHER AND RECHECK 
   1. Replace the disc with a normal one.
   2. Clear the DTCs (see DTC CHECK / CLEAR  ).
   3. Recheck for DTCs and check if the same trouble occurs again.

      OK: Malfunction disappears. 

   NG: REPLACE DISC PLAYER  (See REMOVAL  ).

   OK: END