LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2009 >> LS 600hL >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Audio/Visual) >> Steering Pad Switch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Pad Switch: Installation

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL STEERING PAD SWITCH ASSEMBLY 
    1. Install the switch with the 4 screws
    2. Connect the connector.
  2. INSTALL STEERING PAD  (See INSTALLATION )
  3. INSTALL SWITCH AND VOLUME CASE  (See INSTALLATION )
    Fig 1: Identifying Screws And Steering Pad Switch
    G05783893Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL NO. 2 STEERING WHEEL COVER LOWER  (See INSTALLATION )
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE: When disconnecting the cable some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
  6. INSTALL BATTERY SERVICE HOLE COVER LH  (See INSTALLATION )
  7. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY  (See INSTALLATION )
  8. INSPECT STEERING PAD  (See INSTALLATION )
  9. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (see DIAGNOSIS SYSTEM )
scientia non olet · About LEMON Manuals