Display And Navigation Assembly: Installation

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS )

INSTALL NO. 2 RADIO BRACKET
1. Install the bracket with the 2 bolts.
  
  Fig 1: Locating No. 2 Radio Bracket Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 RADIO BRACKET
1. Install the bracket with the 2 bolts.
INSTALL DISPLAY AND NAVIGATION ASSEMBLY WITH BRACKET
1. Connect the connectors.
  
  Fig 2: Locating No. 1 Radio Bracket Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Insert the display and attach the 6 clips on its backside.
  HINT:
  
  Evenly push the right and left sides of the display into the instrument panel.
  
  Fig 3: Pushing Right And Left Sides Of Display Into Instrument Panel
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the display with the 2 bolts
  
  Fig 4: Locating Display Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (See INSTALLATION )
INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (See INSTALLATION )
INSTALL REAR UPPER CONSOLE PANEL (See INSTALLATION )
INSTALL NO. 3 BOX PANEL (See INSTALLATION )
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (See INSTALLATION )
INSTALL INSTRUMENT PANEL FINISH PANEL END RH (See INSTALLATION )
INSTALL INSTRUMENT PANEL FINISH PANEL END LH (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
INSTALL BATTERY SERVICE HOLE COVER LH (See INSTALLATION )
INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (See INSTALLATION )