Power Window Master Switch: Removal

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
1. Using a screwdriver, detach the 2 clips.
  HINT.
  
  Tape the screwdriver tip before use
  
  Fig 1: Detaching Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the connector and remove the armrest base panel assembly
  
  Fig 2: Locating Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 3 screws and power window regulator master switch.
Fig 3: Locating Power Window Regulator Master Switch Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002