Crawl Switch: Removal: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
WARNING:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTE:
- w/ Navigation System:
  After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .
REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH . Refer to REMOVAL - Step 7
REMOVE INNER NO. 1 INSTRUMENT PANEL BRACKET COVER LH . Refer to REMOVAL - Step 8
REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH . Refer to REMOVAL - Step 9
REMOVE INNER NO. 1 INSTRUMENT PANEL BRACKET COVER RH . Refer to REMOVAL - Step 10
REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY . Refer to REMOVAL - Step 11
REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY . Refer to REMOVAL - Step 12
REMOVE PARKING BRAKE HOLE COVER . Refer to REMOVAL - Step 13
REMOVE CONSOLE CUP HOLDER BOX SUB-ASSEMBLY . Refer to REMOVAL - Step 14
REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY . Refer to REMOVAL - Step 15
REMOVE LOWER POSITION INDICATOR HOUSING . Refer to DISASSEMBLY - Step 4
REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY (CRAWL SWITCH)
1. Disconnect the connector.
  
  Fig 1: Locating Integration Control And Panel Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 5 screws and integration control and panel from the position indicator housing.