Freeze Frame Data
- FREEZE FRAME DATA
HINT:
- When a DTC is detected or the ABS operates, the skid control ECU stores the current vehicle (sensor) state as freeze frame data.
- The skid control ECU stores the number of times (maximum: 31) the ignition switch has been turned from OFF to ON since the last time the ABS was activated. However, if the vehicle is stopped, the vehicle is driven at 7 km/h (4.3 mph) or less, or a DTC is detected, the ECU will not count the next time the ignition switch is turned from OFF to ON.
- Freeze frame data at the time the ABS operates:
The skid control ECU stores data or updates stored data when the ABS operates. This data is erased when the ECU stores data at the time a DTC is detected.
- Freeze frame data at the time a DTC is detected:
When the ECU stores data at the time a DTC is detected, the data will not be updated until the data is cleared.
- Connect the Techstream to the DLC3.
- Turn the ignition switch ON.
- From the display on the Techstream, select Freeze Frame Data.ABS/VSC/TRAC
Tester Display Measurement Item Reference Value Vehicle Speed Wheel speed sensor reading Speed indicated on speedometer Stop Light SW Stop light switch signal Stop light switch ON: ON
Stop light switch OFF: OFFNumber of IG ON Number of operations of ignition switch ON after memorizing freeze frame data 0 to 31 Master Cylinder Sensor1 Master cylinder pressure sensor output voltage Release brake pedal: 0.3 to 0.9 V
Depress brake pedal: 3.2 to 4.5 VOperated System Operate system - ABS activated: ABS
- BA activated: BA
- VSC (TRAC) operate: VSC (TRC)
- No system activated: No SYS
- Fail-safe mode activated: FAIL SF
Yaw Rate Sensor Yaw rate angle sensor output value -70 to 70 Steering Angle Sensor Steering sensor output value Left turn: Increase
Right turn: DropThrottle Sensor Throttle position sensor output value Release accelerator pedal: Approx. 0°
Depress accelerator pedal: Approx. 90°Right And Left G Right and left G -1.5 to 1.5 Back And Forth G Back and forth G -1.5 to 1.5 Shift Lever Position Shift lever position - P: P*
- R: R
- N: N*
- D: D
Buzzer Skid control buzzer signal Skid control buzzer ON: ON
Skid control buzzer OFF: OFFReservoir Warning SW Brake fluid level warning switch signal Brake fluid level warning switch ON: ON
Brake fluid level warning switch OFF: OFFParking Brake SW Parking brake switch signal Parking brake switch ON: ON
Parking brake switch OFF: OFFTRAC/VSC Off Mode TRAC/VSC Off Mode Normal mode
TRAC OFF mode
VSC OFF modeHINT:
*: The A/C switch is OFF and all accessory switches are OFF.