LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2009 >> SC 430 >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control (Service Information) >> Steering Angle Sensor >> Installation >> Installation (To 10/2008)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation (To 10/2008)

  1. INSTALL STEERING SENSOR 
  2. ADJUST CENTER FRONT WHEEL 
  3. INSTALL TURN SIGNAL SWITCH ASSEMBLY  . Refer to INSTALLATION - Step 8
  4. INSTALL SPIRAL CABLE SUB-ASSEMBLY  . Refer to INSTALLATION - Step 1
  5. POSITION SPIRAL CABLE  . Refer to INSTALLATION - Step 3
  6. INSTALL STEERING WHEEL ASSEMBLY  . Refer to INSTALLATION - Step 13
  7. CHECK STEERING WHEEL CENTER POINT 
  8. INSTALL STEERING PAD ASSEMBLY  . Refer to INSTALLATION - Step 1
  9. INSTALL STEERING PAD SWITCH MODULATOR 
  10. INSTALL SWITCH AND VOLUME CASE 
  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  12. PERFORM INITIALIZATION 
    1. Perform initialization. Refer to INITIALIZATION .
      NOTE:

      Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

  13. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light. Refer to DIAGNOSIS SYSTEM .
scientia non olet · About LEMON Manuals