LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2009 >> SC 430 >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (Service Information) >> Mass Air Flow Meter >> Removal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Mass Air Flow Meter: Removal: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    WARNING:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. REMOVE MASS AIR FLOW METER 
      Fig 1: Locating Mass Air Flow Meter With Screws
      GTY127847Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the air flow meter connector.
    2. Remove the 2 screws and mass air flow meter.
    3. Remove O-ring from the mass air flow meter.
scientia non olet · About LEMON Manuals