Front Speed Sensor: Removal

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use the same procedure for the RH side and LH side.
The procedures listed below are for the LH side.

REMOVE FRONT WHEEL
REMOVE FRONT WHEEL OPENING EXTENSION PAD LH (See REMOVAL )
REMOVE FRONT FENDER LINER (See REMOVAL )
REMOVE FRONT SPEED SENSOR
1. Disconnect the front speed sensor connector and clamp.
  
  Fig 1: Locating Front Speed Sensor Connector And Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 bolts from the body and the shock absorber assembly.
3. Disengage the 2 claws from the steering knuckle and body.
  
  Fig 2: Locating Bolts And Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the bolt and the front speed sensor.
  NOTE:
  - Prevent foreign matter from attaching to the sensor tip.
  - Clean the installation hole and the surface for the speed sensor every time the speed sensor is removed.
  Fig 3: Locating Front Speed Sensor Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002