Confirmation Driving Pattern
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG) and turn the Techstream on.
- Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure). Refer DTC CHECK/CLEAR .
- Turn the engine switch off.
- Turn the engine switch on (IG) and turn the Techstream on [A].
- Wait 30 seconds or more.
- Enter the following menus: Powertrain/Engine/Trouble Codes.
- Read the DTCs [B].
HINT:
- If a DTC is output, the system is malfunctioning.
- If a DTC is not output, perform the following procedure.
- Enter the following menus: Powertrain/Engine/Utility/All Readiness.
- Input the DTC: P062F.
- Check the DTC judgment result [B].
Techstream Display Description NORMAL - DTC judgment completed
- System normal
ABNORMAL - DTC judgment completed
- System abnormal
INCOMPLETE - DTC judgment not completed
- Perform driving pattern after confirming DTC enabling conditions
UNKNOWN - Unable to perform DTC judgment
- Number of DTCs which do not fulfill DTC preconditions has reached ECU memory limit
HINT:
If the judgment result shows ABNORMAL, the system has a malfunction.