Rear Speed Sensor: Installation: Installation

INSTALL SPEED SENSOR REAR LH
1. Install the speed sensor rear with the bolt.
  
  Fig 1: Identifying Bolt Of Speed Sensor Rear LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf)
  
  NOTE:
  Prevent foreign matter from attaching to the sensor tip.
2. Connect the speed sensor connector.
INSTALL REAR WHEEL
1. Install the rear wheel.
  Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)
INSPECT SPEED SENSOR SIGNAL
for 2GR-FSE. Refer to TEST MODE PROCEDURE

for 1UR-FSE. Refer to TEST MODE PROCEDURE