LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2010 >> GS 460 >> Repair and Diagnosis >> General Information >> OEM General Information >> Introduction >> Repair Instruction >> Customize Parameters >> Customize Parameters
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters

HINT: 

The following can be customized.

NOTE:
  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Be sure to make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.
  1. POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM 
    TILT & TELESCOPIC

    Display Default Content Setting
    Autoaway/Return function ON ON/OFF of the auto away/return function ON / OFF
  2. AIR CONDITIONING SYSTEM 
    AIR CONDITIONER

    Tester Display Default Content Setting
    Shift Set Temperature
    (Set Temp Shift)    		 NORMAL To control with the shifted temperature against the display temperature +2 C / +1 C / NORMAL / -1 C / -2 C
    Air Inlet Mode
    (Air Inlet Mode)    		 AUTO In case of turning the A/C ON when you desire to make the compartment cool down quickly, this is the function to change the mode automatically to RECIRCULATION mode MANUAL / AUTO
    Compressor Mode
    (Compressor Mode)    		 AUTO Function to turn the A/C ON automatically by pressing the AUTO button when the blower is ON and the A/C is OFF MANUAL / AUTO
    Compressor/DEF Mode
    (Comprs/DEF Oper)    		 LINK Function to turn the A/C ON automatically linked with the FRONT DEF button when A/C OFF MANUAL / LINK
    Evaporator Control
    (Evap Ctrl)    		 AUTO Function to set the evaporator control to the AUTOMATIC position (AUTO) to save power, or to the coldest position (MANUAL) to dehumidify the air and to prevent the windows from fogging up MANUAL / AUTO
    Emission Gas Sensor Shift
    (Gas Sens Shift)    		 NORMAL Function to change the sensitivity of the exhaust gas sensor MU MORE / MORE / LI MORE / NORMAL / LI LESS / LESS / MU LESS
    Button Press Buzzer
    (Button Prs Buz)    		 ON Function to sound a buzzer when button is pressed OFF / ON
    Foot/DEF Auto Mode
    (Foot/DEF Mode)    		 ON Function to turn the airflow from FOOT / DEF ON automatically when AUTO MODE is ON OFF / ON
    Foot/DEF Auto Blow Up
    (Auto Blow Up)    		 ON Function to change the blower level automatically when the defroster is ON OFF / ON
    Ambient Temperature Shift
    (Ambient Tmp Sft)    		 NORMAL Function to control the shifted ambient temperature in relation to the displayed ambient temperature +3 C / +2 C / +1 C / NORMAL / -1 C / -2 C / -3 C
    Foot Air Leak
    (Foot Air Leak)    		 ON Function to cut off the airstream felt underfoot while the vehicle is moving OFF / ON
  3. THEFT DETERRENT SYSTEM 
    SECURITY

    Display (Item) Default Content Setting
    Warning by Horn ON Function that allows vehicle horns and theft deterrent horn to be used as warning device. ON / OFF
    Passive Mode OFF Passive mode is a function that switches theft deterrent system from arming preparation state to armed state 30 seconds after key is not inside vehicle and driver side door is closed.
    In passive mode, theft deterrent system will judge that a theft is taking place and switch to alarm sounding state if one of the following operations are not performed within 14 seconds (see entry delay below) after door is opened:
    • Unlock any door by key or wireless operation
    • Turn the engine switch on (ACC or IG)
    • 2 seconds have passed after turn the engine switch on (IG)
    		 ON / OFF
    Entry Delay Time* 14 s Function that changes entry delay time (time before warning starts) for PASSIVE MODE 0 s / 14 s / 30 s
    • *: w/o Intrusion Sensor
  4. LIGHTING SYSTEM 
    ILLUMINATED ENTRY

    Display Default Content Setting
    I/L when ACC OFF ON Function to light the interior light when the engine switch is operated from on (IG) to off ON / OFF
    Lighting Time 15 s To change the lighting time after closing the door.
    (It will quickly fade out in case of turning the engine switch on (IG))    		 7.5 s / 15 s / 30 s
    Light Control ON Function to light up the step light and door inside handle light when the engine switch is on (IG) and the shift position is not P. ON / OFF
    I/L ON W / Unlock ON Function to light, the interior light etc. when the door is unlocked with a transmitter, door key or door lock control switch. ON / OFF
    Foot Light Set Up ON Function to light up foot light. ON / OFF
    Seat Light Control AVAIL Function to light up the seat light when unlocking with the door key cylinder. NOT AVL / AVAIL
    Steering Light Control AVAIL Function to light up the steering light when unlocking with the door key cylinder. NOT AVL / AVAIL
    Shift Light Control AVAIL Function to light up the shift light when unlocking with the door key cylinder. NOT AVL / AVAIL

    HINT: 

    Sensitivity adjustment can hardly be confirmed. Check by driving the customer's vehicle.

    LIGHT CONTROL

    Display Default Content Setting
    Light Auto OFF Delay 30 s Function to keep on lighting the headlight for a certain period of time after closing all the doors with the engine switch turned off from on (IG) to off under the condition that the light control switch is at HEAD or AUTO with the headlight ON. OFF / 30 s / 60 s / 90 s
    Sensitivity NORMAL To adjust the sensitivity of the lighting illumination. *1 LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
    Disp Ex ON Sen NORMAL Changes the brightness when lowering lights such as the combination meter indicator light, A/C indicator light, and clocklamp. Refer to the illustration.*2 LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
    Disp Ex OFF Sen NORMAL Changes the brightness when lowering lights such as the combination meter indicator light, A/C indicator light, and clocklamp. Refer to the illustration.*3 LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
    Foot Light Time (Driver's Side) 15 s Function to set how long the foot light stays on (driver's side). OFF / 7.5 s / 15 s / 30 s
    Foot Light Time (Passenger's Side) 15 s Function to set how long the foot light stays on (passenger's side). OFF / 7.5 s / 15 s / 30 s
    DRL Function* ON DRL control ON / OFF

    HINT: 

    *:Except Canada

    ILLUSTRATION *1

    Lighting Brightness
    GTY102714Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    Setting DARK2 DARK1 NORMAL LIGHT1 LIGHT2
    ILLUSTRATION *2

    Brightness of lowering the lights
    GTY102714Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    Setting DARK2 DARK1 NORMAL LIGHT1 LIGHT2
    ILLUSTRATION *3

    Brightness when canceling the lowering of the lights
    GTY102714Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    Setting DARK2 DARK1 NORMAL LIGHT1 LIGHT2
  5. LIGHTING SYSTEM (Door linked personal light illumination control) 
    Fig 1: Identifying Map Light Assembly (Door Linked Personal Light Illumination Control)
    GTY103802Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    Mode 1: When door is opened, personal light of opened door illuminates

    Mode 2: When door is opened, both front personal lights and rear personal lights illuminate

    Mode 3: Front personal lights and rear personal lights are not linked to doors

    1. To change modes, press the map light assembly DOOR and ON switch simultaneously, and then turn the engine switch from off to on (IG). Each this operation will change the mode (Mode 1 → Mode 2 → Mode 3 → Mode 1).

      HINT: 

      After changing modes, the front personal lights respond by blinking as follows:

      • Mode 1: once
      • Mode 2: twice
      • Mode 3: three times
  6. LIGHTING SYSTEM (Map light assembly ON switch linked illumination control) 
    Fig 2: Identifying Map Light Assembly (Map Light Assembly On Switch Linked Illumination Control)
    GTY100773Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    • Mode 4: When map light assembly ON switch is pressed, front personal lights, rear personal lights, front seat lights and rear seat lights illuminate
    • Mode 5: When map light assembly ON switch is pressed, front seat lights and rear seat lights illuminate
    1. To change modes, press the map light assembly ON, DOOR and OFF switches simultaneously, and then turn the engine switch from off to on (IG). Each this operation will change the mode (Mode 4 → Mode 5 → Mode 4).

      HINT: 

      After changing modes, the front personal lights responds by blinking as follows:

      • Mode 4: four times
      • Mode 5: five times
  7. WIPER AND WASHER SYSTEM 
    WIPER

    Display (Item) Default Content Setting
    Auto Wiper Available Function to operate the wiper automatically when it is raining Not Available / Available
    Re-wiper Control Speed Mode Function to change the time between end of wiper motor operation and start of wiper operation to prevent streaking from washer fluid OFF / 3s / Speed Mode
    Speed Mode Available Function to change to the intermittent operation when the vehicle comes to a stop from driving condition with the wiper switch in the LO position Not Available / Available
  8. POWER DOOR LOCK CONTROL SYSTEM 
    POWER DOOR LOCK CONTROL SYSTEM

    Tester Display Default Content Setting
    Unlock/Park ON
    OFF*1    		 Function that unlocks all doors when lever is shifted to P from any position other than P while the engine switch is on (IG) ON / OFF
    All Unlock/Open-Close OFF Function that unlock all other doors when opening driver door within 10 seconds after turning the engine switch is on (IG) ON / OFF
    Unlock/Key Twice ON Function that unlocks only driver side door when driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. For OFF setting, turning it once unlocks all doors ON / OFF
    Auto Lock OFF
    ON*2    		 Function that locks all doors when vehicle speed reaches a certain level ON / OFF
    Auto Lock/Shift ON
    OFF*2    		 Function that locks all doors when lever is shifted to P from any position other than P ON / OFF
    • *1: for Taiwan
    • *2: for Korea and Taiwan
  9. WIRELESS DOOR LOCK CONTROL SYSTEM 
    WIRELESS DOOR LOCK CONTROL SYSTEM

    Display (Item) Default Content Setting
    Hazard Answer Back ON When wireless lock switch on transmitter is pressed, this function illuminates all hazard warning lights once. When unlock switch is pressed, all hazard warning lights illuminate twice ON / OFF
    Wireless Control ON ON /OFF of the wireless door lock function ON / OFF
    Open Door Warning ON If door is not completely closed and transmitter LOCK switch is pressed, this function makes buzzer sound for 10 seconds ON / OFF
    Trunk Lid Operation 0.8 PR This function changes transmitter operation method for opening luggage compartment door 1 time / 2 times/ 0.8 PR / OFF
    Panic Function ON Function to operate theft deterrent system by continuously pressing panic switch on transmitter for 2.5 seconds. ON / OFF
    Unlock 2 Operation ON This function unlocks the driver side door when UNLOCK is pressed once, and unlocks all doors when pressed twice. If set to OFF, pressing UNLOCK once unlocks all doors. ON / OFF
    Auto Lock Time 60 s To change time until relocking after unlocking with wireless door lock function 30 s / 60 s / 120 s
    Wireless Buzzer Resp ON ON / OFF on wireless buzzer response function ON / OFF
    Wireless Auto Lock ON This function controls unlocking doors to automatic relocking function ON / OFF
  10. SMART ACCESS SYSTEM WITH PUSH-BUTTON START (FOR DOOR LOCK) 
    SMART ACCESS SYSTEM WITH PUSH-BUTTON START

    Tester Display Default Content Setting
    Park Wait Time 2.5 s Function that sets waiting time to permit opening door after door is locked with entry lock function 0.5 s / 1.5 s / 2.5 s / 5.0 s
    Trunk Open Mode ON Function that permits opening luggage compartment door ON / OFF
    Key Low Battery Warning ON Function that warns driver that key battery power is low ON / OFF
    Ignition Available Area All Function that chooses the available area for electrical key to start engine and release the steering lock. All / FRONT
  11. SMART ACCESS SYSTEM WITH PUSH-BUTTON START (FOR DOOR LOCK) (ENTRY UNLOCK MODE SWITCHING FUNCTION) 
    NOTE:

    Because the key (for card type) does not have a wireless transmitter function, it cannot be used to change the entry unlock mode.

    1. Check that the power source mode is Off and the LED on the key is not blinking. Press the LOCK switch and one of the other switches on the key at the same time for approximately 5 seconds while the key is in the actuation area.
      • Driver door unlock default setting:

        When the switches are pressed and held for 5 seconds, the entry door unlock mode changes in the following order: driver door mode, one door mode, doors on one side mode, all doors mode.

      NOTE:

      After pressing and holding the switches for 5 seconds, wait 5 seconds before performing the same procedure again.

      • Driver door unlock mode:

        When the driver door touch sensor is touched, only the driver door unlocks. When another touch sensor is touched, all doors unlock.

      • All door unlock mode:

        When a touch sensor is touched, all doors unlock.

      • One door mode:

        When a touch sensor is touched, the touch sensor door unlocks. For example, if the driver door touch sensor is touched, the driver door unlocks.

      • Doors on one side mode:

        When a touch sensor is touched, the doors on the side of the touch sensor unlock. For example, when the driver door touch sensor is touched, the driver door and driver side rear door unlock.

    2. The certification ECU receives this signal from the entry door control receiver and changes the smart access system with push-button start to the entry unlock mode.
    3. The certification ECU sounds the buzzers of the wireless door lock buzzer and combination meter to inform the user that the mode has been switched.
      Fig 3: Identifying Multi-Information Display
      GTY101496Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT: 

      The function only changes the entry unlock mode of the smart access system with push-button start. It does not switch the unlocking of the wireless door lock control.

  12. SMART ACCESS SYSTEM WITH PUSH-BUTTON START (FOR DOOR LOCK) (KEY CANCEL) 
    NOTE:

    Because the key (for card type) does not have a wireless transmitter function, it cannot be used to perform the key cancel operation.

    The key cancel operation disables the following functions:

    • Entry Ignition
    • Entry Unlock / Lock
    • Entry Luggage Compartment Open
    • Key Lock-in Prevention
    • Warning
    • Memory Call
    1. The operation procedure is as follows:

      Precondition:

      Engine switch off, driver side door closed and unlocked

      1. Unlock the driver side door once with the UNLOCK switch of the key.
      2. Open the driver door within 5 seconds.
      3. Unlock the driver side door twice with the UNLOCK switch of the key within 5 seconds.
      4. Close and open the driver door twice within 30 seconds.

        (Driver door: Close → Open → Close → Open)

      5. Unlock the driver side door twice with the UNLOCK switch of the key within 5 seconds.
      6. Close and open the driver door within 30 seconds.

        (Driver door: Close → Open)

      7. Close the driver door within 5 seconds.

        When key cancel is activated, the wireless door lock buzzer sounds twice.

        To return to the original condition, perform this procedure again. When the original condition is returned, the wireless door lock buzzer sounds once.

  13. METER / GAUGE SYSTEM 
    COMBINATION METER:

    Tester Display Default Content Setting
    Key Remind Volume Large To change the volume of the key reminder buzzer Large / Medium / Small
    Key Remind Sound Normal To change the frequency of the key reminder buzzer Normal / Fast / Slow
    Language * French To change the language of the multi-information display French / English
    • *: for Canada
  14. INTUITIVE PARKING ASSIST SYSTEM 
    WARNING

    Tester Display Default Content Setting
    Front Buzzer Onset Range Wide Function to set front buzzer activation range Narrow / Wide
    Rear Buzzer Onset Range Wide Function to set rear buzzer activation range Narrow / Wide
    Keep Sense Status Buzzer ON Function to make buzzer sound when distance between vehicle and obstacle does not change for more than 3 seconds ON / OFF
    Fr & Rr Buzzer Volume M2 Function to change volume of buzzer L / M1 / M2 / M3 / H
    SENSOR

    Tester Display Default Content Setting
    Sensor Condition N Range OFF Function to make sensors available when shift position is N OFF / ON
    Sonar Mode Steering Function to change sonar mode Normal / Steering
    DISPLAY

    Tester Display Default Content Setting
    Display Mode Guide Function to change display mode All / Guide / Undisp
  15. POWER WINDOW CONTROL SYSTEM 
    POWER WINDOW

    Tester Display Default Content Setting
    Door Key Linked P/W Up ON Function that raises all engine windows when, with engine switch off, key is used to hold driver door key cylinder to lock position for more than 2.3 seconds ON / OFF
    Door Key Linked P/W Down ON Function that lowers all engine windows when, with engine switch off, key is used to hold driver door key cylinder to unlock position for more than 2.3 seconds ON / OFF
    P/W Down w/ Transmitter* OFF Function that lowers all engine windows when, with engine switch off, unlock switch on transmitter is pressed and held for more than 3.0 seconds ON / OFF
    • *: w/ Full Cover Type Transmitter
  16. REAR SUNSHADE SYSTEM 
    REAR SUNSHADE SYSTEM

    Tester Display Default Content Selection
    Automatic Transmission Reverse Signal Response Time 0.7 sec. Function to adjust reverse-linked sunshade lowering function's response time 0 / 0.7 / 0.9 / 1.2
  17. SLIDING ROOF SYSTEM 
    SLIDE ROOF

    Tester Display Default Content Setting
    Door Key Related Open*1 ON Function to manually open sliding roof linked with power window if holding driver side door key for 1.5 seconds or more to unlock position when engine switch is off ON / OFF
    Door Key Related Close*1 ON Function to manually close sliding roof linked with power window if holding driver side door key for 1.5 seconds or more to lock position when engine switch is off ON / OFF
    Wireless Key Related Open*2, *3 ON Function to manually open sliding roof linked with power window if pressing transmitter UNLOCK switch for 1.5 seconds or more when engine switch is off ON / OFF
    Door Key Related Operation SLIDE Function to select tilt up or slide open of manual sliding roof operation linked with power window
    Activate by holding driver side door key for 1.5 seconds or more to unlock position when engine switch is off    		 TILT / SLIDE
    Wireless Key Related Operation*3 SLIDE Function to select tilt up or slide open of manual sliding roof operation linked with power window
    Activate by pressing on transmitter UNLOCK switch for 1.5 seconds or more when engine switch is off    		 TILT / SLIDE
    • *1: This function is linked with the power window key-linked function. If the power window key-linked function is set to OFF, the sliding roof key-linked function will not operate even when it is set to ON.
    • *2: This function is linked with the power window wireless transmitter-linked function. If the power window wireless transmitter-linked function is set to OFF, the sliding roof wireless transmitter-linked function will not operate even when it is set to ON.
    • *3: This item is displayed on the Techstream screen, however, this function is not available for models with Half Cover Type Transmitter.
scientia non olet · About LEMON Manuals