Accelerator Pedal: Removal: Removal

WARNING: This page is about a different car, the 2010 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE ACCELERATOR PEDAL
1. Disconnect the accelerator pedal position sensor connector.
  
  Fig 1: Identifying Accelerator Pedal Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 bolts and accelerator pedal.
  NOTE:
  - Avoid physical shock to the accelerator pedal.
  - Do not disassemble the accelerator pedal assembly.