Basic Inspection

When the malfunction is not confirmed by the DTC check, troubleshooting should be carried out in all circuits considered to be possible causes of the problem. In many cases, by carrying out the basic engine check shown in the following procedure, the location of the problem can be found quickly and efficiently. Therefore, using this check is essential when troubleshooting the engine.

1. CHECK BATTERY VOLTAGE 
   NOTE:

   Carry out this check with the engine stopped and the engine switch off.

   Result

   Result	Proceed to
   11 V or more	OK
   Below 11 V	NG

   NG → CHARGE OR REPLACE BATTERY 

   OK: Go to next step 

2. CHECK WHETHER ENGINE CRANKS 

   NG → PROCEED TO  PROBLEM SYMPTOMS TABLE  

   OK: Go to next step 

3. CHECK WHETHER ENGINE STARTS 

   NG → GO TO STEP   6 

   OK: Go to next step 

4. CHECK AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY 
   1. Visually check that the air cleaner filter element sub-assembly is not excessively contaminated with dirt or oil.

      NG → REPLACE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY 

      OK: Go to next step 

5. CHECK IDLE SPEED 

   NG → TROUBLESHOOT IDLE SPEED AND PROCEED TO NEXT STEP 

   OK: Go to next step 

6. CHECK FUEL PRESSURE 

   NG → TROUBLESHOOT FUEL PRESSURE AND PROCEED TO NEXT STEP 

   OK: Go to next step 

7. CHECK FOR SPARK 

   NG → TROUBLESHOOT IGNITION SYSTEM AND PROCEED TO NEXT STEP 

   OK → PROCEED TO  PROBLEM SYMPTOMS TABLE