Customize Parameters

WARNING: This page is about a different car, the 2011 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

The following can be customized.

NOTE:

After confirming whether the items of the customer's request are applicable or not for the customized items, perform the customize operation.
Be sure to record the current value before customizing.
In case of performing the troubleshooting, pay attention as there is a possibility that the function is OFF by customizing. (Example: In case of the symptom in which "The wireless operation does not function" is displayed, check that the wireless operation is not OFF by customizing, then perform the troubleshooting.)

AIR CONDITIONING SYSTEM

AIR CONDITIONER

Tester Display	Default	Contents	Setting
Set Temperature Shift	NORMAL	To control with the shifted temperature against the display temperature.	+2C / +1C / NORMAL / -1C / -2C
Air Inlet Mode	AUTO	In case of turning the A/C ON when you desire to make the compartment cool down quickly, this is the function to change the mode automatically to RECIRCULATED mode.	MANUAL / AUTO
Compressor Mode	AUTO	Function to turn the A/C ON automatically by pressing the AUTO button when the blower is ON and the A/C is OFF.	MANUAL / AUTO
Compressor / Air Inlet DEF Operation	LINK	Function to turn the A/C ON automatically linking with the FRONT DEF button when A/C OFF.	NORMAL / LINK
Evaporator Control	AUTO	Function to set the evaporator control to the AUTOMATIC position (AUTO) to save power or the coldest position (MANUAL) to dehumidify the air and to prevent the windows fogging up.	MANUAL / AUTO
Button Press Buzzer	ON	Function to sound a buzzer when a button is pressed.	OFF / ON
Foot / DEF Auto Mode	ON	Function to turn the air flow from FOOT / DEF ON automatically when AUTO MODE is ON.	OFF / ON
Foot / DEF Automatic Blow Up Function	ON	Function to switch the blower level automatically when the defroster is ON.	OFF / ON
Ambient Temperature Shift	NORMAL	To control with the shifted ambient temperature against the display ambient temperature.	+3C / +2C / +1C / NORMAL / -1C / -2C / -3C
Foot Air Leak	ON	Function to cut off the airstream felt underfoot while the vehicle is moving.	OFF / ON

THEFT DETERRENT SYSTEM

SECURITY

Tester Display	Default	Contents	Setting
Passive Mode	OFF	For vehicles with the smart key system, PASSIVE MODE is the function that sets the theft deterrent system 30 seconds after the driver's door is closed from the open condition with the key removed from the ignition key cylinder. For vehicles without the smart key system, PASSIVE MODE is the function that sets the theft deterrent system 30 seconds after the driver's door is closed from the open condition with the ignition switch turned from on (IG) to off.	ON/OFF
Warning by Glass Sensor	ON	Function that turns the glass break sensor on/off. This function is only effective for vehicles with glass break sensors.	ON/OFF
Entry Delay Time	14s	Function that changes the entry delay time (period before starting the warning) for the passive mode.	0s/14s/30s
Warning by Horn	ON	Function to make the horn warning available.	ON/OFF

LIGHTING SYSTEM

ILLUMINATED ENTRY

Tester Display	Default	Contents	Setting
I/L when ACC OFF	ON	Function to turn on the interior light* and ignition key cylinder light when the ignition switch is turned from on (ACC) to off. *: Interior light comes on when the interior light switch is in the DOOR position.	ON / OFF
Illumination System	ON	Function to turn on the center console light when one of the following occurs; the ignition turned on (IG), door unlock or door open.	ON / OFF
Lighting Time	15 s	To change the lighting time after closing the door. (It will quickly fade out in case of turning the ignition on (IG).)	7.5 s / 15 s / 30 s
I/L ON W/Unlock	ON	Function to turn on the interior light* and ignition key cylinder light when the doors are unlocked. *: Interior light comes on when the interior light switch is in the DOOR position.	ON / OFF

LIGHT CONTROL

Tester Display	Default	Contents	Setting
Sensitivity	NORMAL	Adjusts the sensitivity of the automatic light control system.	LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
Control Type	Current	To change the control logic when the light control switch is in the AUTO position. Refer to TABLE 1 .	CURRENT / OLD
Light Auto OFF Delay	30s	Keeps the headlights on for a certain period of time after turning the ignition switch off and closing all the doors with the headlights on.	OFF / 30 s / 60 s / 90 s
Disp Ex ON Sensor	NORMAL	To dim the lights such as the indicator light of the combination meter, A/C indicator light, and clock. Refer to *illustration 2 Fig 1.	LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
Disp Ex OFF Sen	NORMAL	To cancel to dim the lights such as the indicator light of the combination meter, A/C indicator light, and clock. Refer to *illustration 3Fig 1.	LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
DRL Function	ON	ON / OFF of the DRL function	ON / OFF

HINT:

Sensitivity adjustment is dependent on the owner's preference. Actual driving by the owner is required.

TABLE 1

	Brightness of the surrounding when lighting	Lighting delay	Delay of turning light off	**2
OLD	Old logic	6 sec.	6 sec.	3 sec.
CURRENT	New logic**1 ('97/8)	15 sec.	15 sec.	15 sec.

**1: The new system has the ability to light up two times brighter than the old system.

**2: Delay time until the headlight is turned on when the outside suddenly gets dark.

Fig 1: View Of Illumination Chart

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

WIPER AND WASHER SYSTEM

WIPER

Tester Display	Default	Contents	Setting
Auto wiper	Available	Function to operate the wiper automatically when it is raining.	Not Available / Available
Re-wiper Control	Speed Mode	Function to change the time between end of the washer motor operation and start of wiper operation, to prevent streaking from washer fluid.	OFF / 3s / Speed Mode
Speed Mode	Available	Function to change to the intermittent operation mode when the vehicle comes to a stop (0 vehicle speed) from a driving condition where the wiper switch is in the LO position.	Not Available / Available

POWER DOOR LOCK CONTROL SYSTEM

MAIN BODY ECU (Using Techstream):

DOOR LOCK

Tester Display	Default	Contents	Setting
Auto Lock	OFF	Function that locks the doors once when the vehicle speed reaches a certain level.	ON/OFF
Unlock Key Twice	ON	Functions that unlocks only driver side door when driver side door key cylinder is turned to unlock once and unlocks all the doors when it is turned to unlock twice. In OFF setting, turning it once unlocks all doors.	ON/OFF
All Unlock/Open-Close	ON	Function that unlocks all doors when opening driver door within 10 seconds after turning the ignition switch on (IG)	ON/OFF
Unlock/Park	OFF	Function that unlocks doors when lever is shifted to P position from any position other than P while the ignition switch is ON.	ON/OFF

MANUAL SETTING (Switch operation)
1. Close all the doors.
2. Turn the ignition switch on (IG).
3. Within ten seconds after the ignition switch on (IG).
  - To set function (Shift-linked Automatic Door Lock)
    Push and hold the LOCK side of the power door lock switch for five seconds with the shift lever in the P.
  - To set function (Speed-sensitive Automatic Door Lock)
    Push and hold the LOCK side of the power door lock switch for five seconds with the shift lever in any position except P.
  - To set function (Shift-linked Automatic Door Unlock)
    Push and hold the UNLOCK side of the power door lock switch for five seconds with the shift lever in the P.
  - To set function (Opening Driver's Door-linked Automatic Door Unlock)
    Push and hold the UNLOCK side of the power door lock switch for five seconds with the shift lever in any position except P.
  If user wants to cancel a function, repeat the procedure. Each time user perform the procedure, the function is set or cancelled.

WIRELESS DOOR LOCK CONTROL SYSTEM

Main Body ECU

Tester Display	Default	Contents	Setting
Wireless Control (Wireless door lock control function)	ON	Function that turns wireless door lock function ON/OFF.	ON/OFF
Hazard Answer Back (Hazard answer-back for wireless door lock control)	ON	When lock switch on transmitter is pressed, this function blinks all hazard warning lights once. When unlock switch is pressed, all hazard warning lights blink twice.	ON/OFF
Wireless Auto Lock (Wireless auto lock)	ON	This function turns the wireless auto lock function on or off.	ON / OFF
Wireless Buzzer Resp (Buzzer answer-back for wireless door lock control)	ON	Function that sounds wireless door lock buzzer for answer-back when lock/unlock switch on transmitter is pressed.	ON/OFF
Open Door Warning	ON	If any door is not completely closed and transmitter lock switch is pressed, this function sounds buzzer for 10 seconds.	ON/OFF
Unlock 2 Operation (Wireless unlock operated twice)	ON	Function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. if setting is OFF, pressing unlock switch once makes all doors unlock.	ON/OFF
Panic Function (*1)	ON	Function that operates theft deterrent system when transmitter panic switch on transmitter is pressed and held for 2.5 seconds.	ON/OFF
Auto Lock Time	60 s	This function regulates the interval between unlocking and automatic relocking of doors.	30s/60s/120s/OFF
Trunk Lid Operation (Wireless trunk opener function setting)	0.8 s	Changes operation method of transmitter to open trunk.	1tim ON/2tim ON/0.8 s/OFF

(*1): This function cannot be turned on or off if the security system is turned off.

SMART KEY SYSTEM

Using Techstream.

WIRELESS DOOR LOCK

Tester Display	Default	Contents	Setting
Open Door Warning (Open door warning)	ON	Function to make the buzzer sound for 10 seconds if the door is open when locking with the wireless door lock function.	ON / OFF
Wireless Control (Wireless door lock control function)	ON	ON / OFF of the wireless door lock function.	ON / OFF
Alarm Function (*1) (Panic function)	ON	Function to operate the theft deterrent system by keeping pressing the lock button of the transmitter for 2.5 seconds. If there is a panic button, press the panic button instead of the lock button.	ON / OFF
Unlock 2 Operation (2 times operation wireless unlock)	ON	Function to unlock the driver's door by pressing the unlock button of the transmitter once and to unlock all the doors by pressing it twice. In the OFF setting, pressing one time makes all the doors unlocked.	ON / OFF
Trunk Lid Operation (Trunk lid open function type)	0.8 s PR	To change the operation method of opening the luggage compartment by the transmitter.	1 TIME / 2 TIMES / 0.8 s PR / OFF
Auto Lock Time (Auto lock time)	30 s	To change the time until re-locking after unlocking with the wireless door lock function.	60 s / 30 s
Hazard Answer Back (Hazard answer back of the wireless)	ON	Function to light up the all turn signal lights once when pressing the transmitter lock button and twice when pressing the unlock button.	ON / OFF
Wireless Auto Lock (Wireless auto lock)	ON	This function turns the wireless auto lock function on or off.	ON / OFF
Wireless Buzzer Resp (Wireless buzzer response)	ON	ON / OFF of the wireless buzzer response function.	ON / OFF

*1: w/ Theft deterrent system

WARNING (COMBINATION METER)

Tester Display	Default	Contents	Setting
Key Remnd Volum (Key reminder buzzer volume)	LARGE	To change the volume of the key reminder buzzer.	LARGE / MEDIUM / SMALL
Key Remnd Sound (Key reminder buzzer sound)	NORMAL	To change the frequency of the key reminder buzzer.	NORMAL / FAST / SLOW / 0 s

SMART

Tester Display	Default	Contents	Setting
Ignition Available Area (SMART ignition available area)	ALL	Function to choose the available area for smart key to start E/G and cancel the Steering Lock.	FRONT / ALL
Park Wait Time (Wait time to permit opening door after locking)	2.5 s	Setting a wait time to permit opening a door after it being locked with SMART entry.	0.5 s / 1.5 s / 2.5 s / 5 s
Trunk Open Mode (Luggage compartment opening operation when vehicle is locked)	ON	Function to open a luggage compartment when the driver has the key and press the luggage open button.	ON / OFF
Key Low Battery Warning	ON	Function to set a warning function for the time when a key battery becomes weak.	ON / OFF

Entry Unlock Mode Switching
1. Check that the power source mode is OFF and the LED on the key does not blink. Press the LOCK button and one of the other buttons on the key at the same time for approximately 5 seconds while the key is in the actuation area.
2. Certification ECU receives this signal from the tuner and switches the entry unlock mode.
3. The certification ECU sounds the buzzer of the wireless door lock buzzer and combination meter to inform the user that the mode has been switched.
  
  Fig 2: Identifying Wireless Door Lock Buzzer Blinking Pattern
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  HINT:
  - The function only switches the entry unlock of the smart key system. It does not switch the unlocking of the wireless door lock remote control.
  - The entry unlock mode cannot be changed for 5 seconds after the previous change.
Key Cancel
Key cancel is operated when certain operations are performed with the vehicle in the following conditions.
- A function that allows you to lock / unlock the doors and open the luggage compartment by simply carrying a key.
- A function that causes the vehicle to beep if keys are left inside the vehicle or luggage compartment and a door is closed.
- A function that recalls the position of the driver's seat and side rear view mirrors.
1. The operation procedures are as follows:
  1. Unlock the driver side door once with the UNLOCK button of the key.
  2. Open the driver door within 5 seconds.
  3. Unlock the driver side door twice with the UNLOCK button of the key within 5 seconds.
  4. Close and open the driver door twice within 30 seconds.
    (Driver Door: Close → Open → Close → Open)
  5. Unlock the driver side door twice with the UNLOCK button of the key within 5 seconds.
  6. Close and open the driver door within 30 seconds.
    (Driver Door: Close → Open)
  7. Close the driver door within 5 seconds.
    - When key cancel is activated, the wireless door lock buzzer sounds once.
    - To return to the original condition, perform the procedures again. When key cancel is returned, the wireless door lock buzzer sounds twice.

METER / GAUGE SYSTEM

BUZZER ON/OFF SETTING

The buzzer ON/OFF setting, which is a setting of the buzzer function of the combination meter, can disable the driver's seat belt buzzer and front passenger's seat belt buzzer.

NOTE:

Basically, these buzzers should be set on for safe driving. However, perform the following procedures only if it is necessary to set the buzzer off.

PROCEDURE

Steps	Driver's Seat Belt Buzzer	Front Passenger's Seat Belt Buzzer
1	Turn the ignition switch on (IG).	Turn the ignition switch on (IG).
2	Press the ODO/TRIP switch until odometer displays "ODO".	Press the ODO/TRIP switch until odometer displays "ODO".
3	Turn the ignition switch off.	Turn the ignition switch off.
4	Turn the ignition switch on (IG) while depressing the brake pedal.	Turn the ignition switch on (IG) while depressing the brake pedal.
5	Press the ODO/TRIP switch immediately (within 6 seconds) and hold it down for 10 seconds or more.	Sit in the front passenger seat. Press the ODO/TRIP switch immediately (within 6 seconds after turning the power switch ON) and hold it down for 10 seconds or more.
6	Continue holding down the ODO/TRIP switch and fasten the driver's seat belt.	Continue holding down the ODO/TRIP switch and fasten the front passenger's seat belt.
7	Check that the odometer displays either "b-on" or "b-off". (*)	Check that the odometer displays either "b-on" or "b-off". (*)
8	Press the ODO/TRIP switch to change the display to "b-off".	Press the ODO/TRIP switch to change the display to "b-off".
9	Turn the ignition switch off.	Turn the ignition switch off.
10	Turn the ignition switch on (IG) while depressing the brake pedal.	Turn the ignition switch on (IG) while depressing the brake pedal.
11	Check that no buzzer sounds.	Check that no buzzer sounds when sitting on the front passenger's seat.

*:"b-off" indicates that the buzzer is OFF. "b-on" indicates that the buzzer is ON. The buzzer ON/OFF setting will be finished (the odometer will display "ODO") if the ODO/TRIP switch is not operated for 10 seconds or more. In this case, perform step 11 to check that buzzer ON/OFF setting is complete. If it is not complete, start from step 1 again.

NOTE:

When either the battery cable or the combination meter connector is disconnected, these buzzers are set on.

CUSTOMIZE PARAMETER (Using Techstream)

COMBINATION METER

Tester Display	Default	Contents	Setting
Key Remind Volume	Large	Function to change the volume of the key reminder buzzer.	Large, Medium, Small
Key Remind Sound	Slow	Function to change the frequency of the key reminder buzzer.	Fast, Normal, Slow

REAR SUNSHADE SYSTEM

OTHERS

Tester Display	Default	Contents	Setting
R-SHADE DELAY T	0.7s	Function to change the time before reverse-linked sunshade lowering function is activated	0s / 0.7s / 0.9s / 1.2s