Installation

CRUISE CONTROL: OBJECT RECOGNITION CAMERA: INSTALLATION

1. INSTALL OBJECT RECOGNITION CAMERA





(a) Temporarily install the object recognition camera with the clip.

(b) Tighten the 3 bolts in alphabetical order.

Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)

(c) Attach the 3 wire harness clamps.

(d) Connect the 3 connectors.

2. INSTALL REAR INNER VIEW MIRROR ASSEMBLY Installation

3. INSTALL RAIN SENSOR COVER Installation

4. INSTALL VISOR HOLDER Installation

5. INSTALL VISOR ASSEMBLY LH Installation

6. INSTALL VISOR ASSEMBLY RH Installation

7. INSTALL VISOR BRACKET COVER Installation

8. INSTALL MAP LIGHT ASSEMBLY Installation

9. ADJUST OBJECT RECOGNITION CAMERA Adjustments