DTC P060D: Internal Control Module Accelerator Pedal Position Performance: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the Techstream on.
4. Clear DTCs. Refer toDTC CHECK / CLEAR .
5. Turn the engine switch off and turn the Techstream off.
6. Disconnect the Techstream.
7. Disconnect the cable from the negative (-) battery terminal and wait for 1 minute. Refer toPRECAUTION .
8. Connect the cable to the negative (-) battery terminal. Refer toPRECAUTION .
9. Connect the Techstream to the DLC3.
10. Turn the engine switch on (IG).
11. Turn the Techstream on.
12. Select the following menu items: Powertrain / Engine / Trouble Codes.
13. Read the DTCs.

    Result

    Result	Proceed to
    No output	A
    P060D	B

B → See step   3 

A → See step   2