Steering Lock System: Precaution: Precaution
- PRECAUTIONS WHEN WORKING ON ELECTRIC STEERING LOCK
- After replacing the steering lock actuator assembly (steering lock ECU), perform the key ID code registration.
- If the steering lock actuator assembly (steering lock ECU) is replaced, open and close the driver's door. The engine may not start until the driver's door is opened or closed.
HINT:
Opening and closing the driver's door causes the steering lock actuator assembly (steering lock ECU) to memorize the correct steering lock bar position.
- When the main body ECU is in sleep mode, it cannot communicate with the Techstream. Therefore, checking for DTCs of the smart access system with push-button start and checking the Data List with the engine switch off cannot be performed. To exit sleep mode, perform the following steps: 1) open the driver's door with the engine switch off, 2) open and close any door several times at 1.5 second intervals.