Occupant Classification System: Precaution: Precaution
WARNING:
Do not use seat accessories (such as cushions or covers) that cover the front seat. Also, do not modify or replace the upholstery of the front seat. Doing so may prevent the front passenger airbag system from activating correctly, disable the system or cause the front passenger airbag to inflate accidentally, and result in death or serious injury.
NOTE:
- Replace the occupant classification ECU, occupant classification sensor, seat cushion cover pad, seat cushion cover and seat cushion seat heater as a 5 part set (see supply set part no.).
- When disconnecting the cable from the negative (-) battery terminal, initialize the following system (s) after the cable is reconnected.
System Name See procedure Front Power Seat Control System Refer to INITIALIZATION Meter / Gauge System
- INSPECTION PROCEDURE FOR VEHICLE INVOLVED IN ACCIDENT
- Perform zero point calibration and sensitivity check if any of the following conditions apply. Refer to INITIALIZATION .
- The occupant classification ECU is replaced.
- The passenger airbag ON/OFF indicator indicates OFF when the front passenger seat is not occupied.
- The vehicle is brought to the workshop for repair due to an accident or a collision.
- Perform zero point calibration and sensitivity check if any of the following conditions apply. Refer to INITIALIZATION .