Front Speed Sensor: Installation: Installation

HINT: 

• Use the same procedures for the LH side and RH side.
• The procedures listed below are for the LH side.

1. INSTALL FRONT SPEED SENSOR LH 
   1. Install the sensor with the bolt.
      Fig 1: Identifying Front Speed Sensor And Fastener

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf) 

   2. Install the sensor harness with the 2 clamp bolts and resin clip.

      Torque: 6.0 N*m (61 kgf*cm, 53 in.*lbf) 

   3. Connect the sensor connector.
      Fig 2: Identifying Speed Sensor Connector

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL FRONT FENDER LINER LH 
3. INSTALL FRONT WHEEL 
   1. Install the wheel with the 5 nuts.

      Torque: 103 N*m (1050 kgf*cm, 76 ft.*lbf) 

   2. Install the ornament with the 10 bolts.

      Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf) 

4. CHECK ABS SPEED SENSOR SIGNAL 
   1. Check the ABS speed sensor signal. Refer to TEST MODE PROCEDURE .