DTC P0116: Engine Coolant Temperature Circuit Range / Performance Problem: Procedure
- CHECK OTHER DTC OUTPUT (IN ADDITION TO DTC P0116)
Result
Result Proceed to P0116 A P0116 and other DTCs B B → See step 3
A: Go to next step
- INSPECT THERMOSTAT
- Remove the thermostat. Refer to INSPECTION .
- Check the valve opening temperature of the thermostat.
OK
Temperature value is 80 to 84°C (176 to 183°F)
HINT:
In addition to the above check, confirm that the valve is completely closed when the temperature is below the standard.
NG → See step 4
OK → See step 5
- GO TO DTC CHART. Refer to DIAGNOSTIC TROUBLE CODE CHART
- REPLACE THERMOSTAT. Refer to REMOVAL
- REPLACE ENGINE COOLANT TEMPERATURE SENSOR. Refer to REMOVAL