Crankshaft Position Sensor: Inspection: Inspection

WARNING: This page is about a different car, the 2011 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT CRANKSHAFT POSITION SENSOR
1. Using an ohmmeter, measure the resistance between the terminals.
  
  Fig 1: Measuring Resistance between Crankshaft Position Sensor Connector Terminals
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Resistance
  
  1,630 to 2,740 Ω at cold
  
  2,065 to 3,225 Ω at hot