Power Door Lock Control System: Precaution: Precaution

NOTICE FOR INITIALIZATION

NOTE:

When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following system after the cable is reconnected.

System Name	See Procedure
Parking Assist Monitor System	Refer to INITIALIZATION
Power Door Lock Control System	Refer to INITIALIZATION

PRECAUTIONS WHEN USING TECHSTREAM
1. When using the Techstream with the power switch off to troubleshoot:
  Connect the Techstream to the vehicle, and turn the courtesy light switch on and off at 1.5-second intervals until communication between the Techstream and the vehicle begins.
2. After all DTCs are cleared, check if the trouble occurs again 6 seconds after the power switch is turned on (IG).