LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2011 >> CT 200h >> Repair and Diagnosis (Single Page) >> Hybrid/Electric Powertrain >> Testing and Diagnosis >> Hybrid Control System (Diagnostics - Introduction) >> Hybrid Control System >> Check For Intermittent Problems >> Check For Intermittent Problems
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check For Intermittent Problems

  1. CHECK FOR INTERMITTENT PROBLEMS 
    1. Perform a simulation test. Refer to HOW TO PROCEED WITH TROUBLESHOOTING .
      1. For the simulation test, reproduce the driving conditions that were present when the trouble occurred. These conditions should be based on the customer's comments and freeze frame data that is recorded with DTCs, such as the opening angle of the accelerator pedal, SOC (state of charge), engine coolant temperature, engine rpm, and MG1/MG2 rpm and torque.
    2. Check the connector(s) and terminal(s). Refer to ELECTRONIC CIRCUIT INSPECTION PROCEDURE .
    3. Wiggle the harness and connector(s). Refer to HOW TO PROCEED WITH TROUBLESHOOTING .
    4. Heat or cool suspected parts. Refer to HOW TO PROCEED WITH TROUBLESHOOTING .
scientia non olet · About LEMON Manuals