DTC Check/Clear
- CHECK DTC
- Connect Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the tester on.
- Enter the following menus: Body Electrical/Smart Access/Trouble Codes.
- Check the details of the DTC(s). Refer to DIAGNOSTIC TROUBLE CODE TABLE .
- CLEAR DTC
- Connect Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the tester on.
- Enter the following menus: Body Electrical/Smart Access/Trouble Codes.
- Erase the DTCs.