Camshaft Oil Control Valve: Installation: Installation

INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 2 Exhaust Side)
1. Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.
  
  Fig 1: Identifying O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the camshaft timing oil control valve with the bolt.
  
  Fig 2: Identifying Bolt On Camshaft Timing Oil Control Valve Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  NOTE: Make sure that the O-ring is not cracked or jammed when installing the oil control valve.
3. Connect the camshaft timing oil control valve connector.
INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 2 Intake Side)
1. Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.
  
  Fig 3: Identifying O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the camshaft timing oil control valve with the bolt.
  
  Fig 4: Identifying Camshaft Timing Oil Control Valve Assembly Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  NOTE: Make sure that the O-ring is not cracked or jammed when installing the oil control valve.
3. Connect the camshaft timing oil control valve connector.
INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 1 Exhaust Side)
1. Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.
  
  Fig 5: Identifying O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the camshaft timing oil control valve with the bolt.
  
  Fig 6: Identifying Bolt On Camshaft Timing Oil Control Valve Assembly Location
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  NOTE: Make sure that the O-ring is not cracked or jammed when installing the oil control valve.
3. Connect the camshaft timing oil control valve connector.
INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 1 Intake Side)
1. Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.
  
  Fig 7: Identifying O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the camshaft timing oil control valve with the bolt.
  
  Fig 8: Identifying Bolt On Camshaft Timing Oil Control Valve Assembly Location
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  NOTE: Make sure that the O-ring is not cracked or jammed when installing the oil control valve.
3. Connect the camshaft timing oil control valve connector.
INSTALL INTAKE AIR SURGE TANK . Refer to INSTALLATION - Step 3
INSTALL NO. 1 AIR CLEANER INLET . Refer to INSTALLATION - Step 75
INSTALL AIR CLEANER CASE SUB-ASSEMBLY . Refer to INSTALLATION - Step 76
INSTALL AIR CLEANER CAP SUB-ASSEMBLY See step 4
INSTALL AIR CLEANER INLET ASSEMBLY . Refer to INSTALLATION - Step 78
INSTALL FRONT SUSPENSION UPPER CENTER BRACE . Refer to INSTALLATION - Step 16
ADD ENGINE COOLANT . Refer to ON-VEHICLE INSPECTION - Step 9
CHECK FOR ENGINE COOLANT LEAKS . Refer to ON-VEHICLE INSPECTION - Step 1
INSTALL V-BANK COVER SUB-ASSEMBLY . Refer to INSTALLATION - Step 101
INSTALL ENGINE ROOM SIDE COVER LH . Refer to INSTALLATION - Step 102
INSTALL ENGINE ROOM SIDE COVER RH . Refer to INSTALLATION - Step 103
INSTALL COOL AIR INTAKE DUCT SEAL . Refer to INSTALLATION - Step 104
INSTALL ENGINE UNDER COVER RH
INSTALL ENGINE UNDER COVER LH