Throttle Body: Installation: Installation

INSTALL THROTTLE BODY
1. Install a new throttle body gasket to the intake air surge tank.
  
  Fig 1: Identifying Recess
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the throttle body with the 4 bolts.
  
  Fig 2: Identifying Bolts On Throttle Body
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
3. Connect the 2 water by-pass hoses.
  
  Fig 3: Identifying Water By-Pass Hoses
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Connect the throttle body connector and clamp.
  
  Fig 4: Identifying Throttle Body Connector And Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 AIR CLEANER INLET . Refer to INSTALLATION - Step 75
INSTALL AIR CLEANER CASE SUB-ASSEMBLY . Refer to INSTALLATION - Step 76
INSTALL AIR CLEANER CAP SUB-ASSEMBLY
1. Install the air cleaner cap sub-assembly, and connect the 3 bands.
  
  Fig 5: Identifying Air Cleaner Cap Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the mass air flow meter connector (^* 1).
  
  Fig 6: Identifying Mass Air Flow Meter Connector, Ventilation Hose And Hose Band
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the No. 2 ventilation hose (^* 2).
4. Connect the hose band (^* 3).
5. Connect the 2 vacuum hoses.
  
  Fig 7: Identifying Vacuum Hoses
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL AIR CLEANER INLET ASSEMBLY . Refer to INSTALLATION - Step 78
ADD ENGINE COOLANT . Refer to ON-VEHICLE INSPECTION - Step 9
CHECK FOR ENGINE COOLANT LEAKS . Refer to ON-VEHICLE INSPECTION - Step 1
CHECK FUNCTION OF THROTTLE BODY See step 1
INSTALL ENGINE ROOM SIDE COVER LH . Refer to INSTALLATION - Step 102
INSTALL COOL AIR INTAKE DUCT SEAL . Refer to INSTALLATION - Step 104
INSTALL V-BANK COVER SUB-ASSEMBLY . Refer to INSTALLATION - Step 101