TPMS Reset Procedures: Notes

NOTE: The system will need to be initialized when tires are rotated; tires are replaced with tires of different pressures; tire pressure sensor and/or tire pressure monitor ECU are replaced. Set tire pressure within the specified range before initializing. See INITIALIZING TIRE PRESSURE MONITOR SYSTEM . When a tire pressure sensor and/or tire pressure monitor ECU are replaced, the sensor ID must be memorized by the tire pressure monitor ECU prior to system initialization. See TIRE PRESSURE SENSOR REGISTRATION .

NOTE: If negative battery terminal is disconnected, initialize the following systems after the cable is reconnected: clearance sonar, power window, sliding roof and variable gear ratio steering. Refer to owner's manual or appropriate manufacturer service information.

TPMS reset is not required if re-inflating tires to the specified pressure. Warning indicators should turn off a few minutes after air is put into a deflated tire.