DTC Check/Clear
- CHECK DTC
- Connect the Techstream to the DLC3.
- Turn the power switch ON (IG).
- Turn the Techstream on.
- Read the DTCs by following the display on the Techstream. Enter the following menus: Chassis/EMPS/Trouble Codes.
- CLEAR DTC
- Connect the Techstream to the DLC3.
- Turn the power switch ON (IG).
- Turn the Techstream on.
- Clear the DTCs by following the display on the Techstream. Enter the following menus: Chassis/EMPS/Trouble Codes.