Jam Protection Function does not Operate: Procedure

1. Initialize the power window control system (applicable location). Refer to INITIALIZATION .

NEXT: Go to next step 

1. Check if the jam protection function operates normally for the applicable power window.

   HINT: 

   The jam protection function will not operate within 15 mm (0.591 in.) of the fully closed position.

   OK

   Jam protection function operates normally.

   Result

   Result	Proceed to
   OK	A
   NG (Driver door window)	B
   NG (Front passenger door window)	C

B → See step   3 

C → See step   4 

A → END (INITIALIZATION WAS INCORRECT)