LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2011 >> IS F >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (Service Information) >> Mass Air Flow Meter >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Mass Air Flow Meter: Installation: Installation

  1. INSTALL MASS AIR FLOW METER 
    1. Install the MAF meter with the 2 screws.
      Fig 1: Identifying Mass Air Flow Meter Screws
      GTY148744Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 1.0 N*m (10 kgf*cm, 9 in.*lbf) 

      NOTE:

      Make sure that the O-ring is not pinched.

    2. Connect the MAF meter connector.
  2. INSTALL ENGINE ROOM SIDE COVER RH  . Refer to INSTALLATION - Step 92
  3. INSTALL COOL AIR INTAKE DUCT SEAL  . Refer to INSTALLATION - Step 94
  4. INSTALL V-BANK COVER SUB-ASSEMBLY  . Refer to INSTALLATION - Step 95
scientia non olet · About LEMON Manuals