Fuel Relief Valve: Installation: Installation

INSTALL FUEL RELIEF VALVE ASSEMBLY
1. Install a new gasket to the fuel relief valve assembly.
  
  Fig 1: Identifying Fuel Relief Valve Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using a 14 mm deep socket wrench, install the fuel relief valve assembly to the No. 2 fuel delivery pipe.
  Torque: 40 N*m (408 kgf*cm, 30 ft.*lbf)
  NOTE:
  - Do not apply oil to the threads of the fuel relief valve assembly and No. 2 fuel delivery pipe.
  - Do not allow foreign matter to enter the pipe during installation.
3. Connect the No. 3 fuel hose.
  
  Fig 2: Identifying Fuel Hose
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY See step 8
INSTALL INTAKE AIR SURGE TANK ASSEMBLY
1. Install the intake air surge tank assembly. Refer to INSTALLATION .
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .
INSPECT FOR FUEL LEAK . Refer to ON-VEHICLE INSPECTION - Step 1