Installation (From 12/2010): Installation

WARNING: This page is about a different car, the 2011 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL VVT SENSOR
1. Intake camshaft (Bank 1).
  1. Install the VVT sensor with the bolt.
    
    Fig 1: Locating VVT Sensor Connector
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    
    Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  2. Connect the VVT sensor connector.
2. Exhaust camshaft (Bank 1).
  1. Install the VVT sensor with the bolt.
    
    Fig 2: Locating VVT Sensor Connector Bolt
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    
    Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  2. Connect the VVT sensor connector.
  3. Install the cowl top outside panel front. Refer to INSTALLATION - Step 19 .
  4. Install the windshield wiper link assembly. Refer to INSTALLATION .
3. Exhaust camshaft (Bank 2).
  1. Install the VVT sensor with the bolt.
    
    Fig 3: Locating VVT Sensor Connector Bolt
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    
    Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  2. Connect the VVT sensor connector.
4. Intake camshaft (Bank 2).
  1. Install the VVT sensor with the bolt.
    
    Fig 4: Locating VVT Sensor Connector Bolt
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    
    Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  2. Connect the VVT sensor connector.
INSTALL V-BANK COVER SUB-ASSEMBLY . Refer to INSTALLATION - Step 14