Customize Parameters
- CUSTOMIZING FUNCTION WITH TECHSTREAM
HINT:
The following items can be customized.
NOTE:- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Customize Setting.
- Select the setting by referring to the table below.DOOR LOCK
Display Default Content Setting Unlock Key Twice ON Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors. ON or OFF Auto Lock OFF
ON*Function that locks all doors when the vehicle speed reaches a certain level. ON or OFF Auto Lock/Shift ON
OFF*Function that locks all doors when the shift lever is moved from P to any position other than P while the engine is running and all doors are closed. ON or OFF Auto Unlock/Shift ON Function that unlocks all doors when the shift lever is moved to P from any position other than P while the engine switch is on (IG). ON or OFF All Unlock/Open-Close OFF Function that unlocks the other doors when the driver door is opened within 10 seconds after the engine switch is turned off. ON or OFF - *: w/o Occupant Classification System
ILLUMINATED ENTRYDisplay Default Content Setting Lighting Time 15 s Function that changes the lighting time after closing all doors. (It will quickly fade out in case of turning the engine switch from off to on (ACC) or on (IG).) 7.5 s, 15 s or 30 s