TPMS Reset Procedures: Notes
NOTE:
The system will need to be initialized when tires are rotated; tires are replaced with tires of different pressures; tire pressure sensor and/or tire pressure monitor ECU are replaced. See INITIALIZING TIRE PRESSURE MONITOR SYSTEM . When a tire pressure sensor and/or tire pressure monitor ECU are replaced, the sensor ID must be memorized (registered) by the tire pressure monitor ECU prior to system initialization. See TIRE PRESSURE SENSOR REGISTRATION .
When the tire pressure warning light and message do not go off, or when they come on during driving, check tire pressure and adjust as necessary. Warning indicators should turn off a few minutes after air is put into a deflated tire.
NOTE:
Initialization is NOT required if re-inflating tires to the specified tire pressure.