DTC P0111: Intake Air Temperature Sensor Gradient Too High: Procedure
- CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0111)
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Powertrain/Engine and ECT/Trouble Codes.
- Read the DTCs.
Result
Result Proceed to DTC P0111 and other DTCs are output A DTC P0111 is output B HINT:
If any DTCs other than P0111 are output, troubleshoot those DTCs first.
B → See step 3
A → See step 2
- GO TO DTC TABLE. Refer to DIAGNOSTIC TROUBLE CODE TABLE
- REPLACE MASS AIR FLOW METER SUB-ASSEMBLY. Refer to REMOVAL