Rear Speed Sensor: Installation: Installation

INSTALL REAR SPEED SENSOR
1. Install the rear speed sensor with the bolt.
  
  Fig 1: Identifying Speed Sensor, Connector, & Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf)
  
  NOTE:
  Prevent foreign matter from attaching to the sensor tip.
2. Connect the speed sensor connector.
INSTALL REAR WHEEL
1. Install the rear wheel.
  Torque: 103 N*m (1, 050 kgf*cm, 76 ft.*lbf)
INSPECT SPEED SENSOR SIGNAL
Refer to TEST MODE PROCEDURE