LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2012 >> IS 250 Base, RWD, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Fuel System >> Fuel System (Service Information) >> Injector Driver >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Injector Driver: Installation: Installation

  1. INSTALL INJECTOR DRIVER 
    1. Install the injector driver with the bolt and 2 nuts.
      Fig 1: Location of Injector Driver Bolt And Nuts
      GTY124269Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

      NOTE:
      • Be careful not to drop or strike the injector driver.
      • The injector driver is grounded at the bolt and nut. To ensure that it is grounded, clean all oil and foreign matter from the installation areas of the injector driver and engine before installing the injector driver.
    2. Connect the 4 connectors to the injector driver.
      Fig 2: Identifying Injector Driver
      GTY146064Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO. 1 ENGINE COVER  . Refer to INSTALLATION - Step 27
  3. INSTALL NO. 1 INLET AIR CLEANER  . Refer to INSTALLATION - Step 87
  4. INSTALL COOL AIR INTAKE DUCT SEAL  . Refer to INSTALLATION - Step 118
scientia non olet · About LEMON Manuals