LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2012 >> IS 350 Base, AWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belts (Service Information) >> Child Restraint Seat Tether Anchor >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Child Restraint Seat Tether Anchor: Installation: Installation

  1. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET 
    1. Install the 3 child restraint seat tether anchor brackets with the 3 bolts.

      Torque: 21 N*m (214 kgf*cm, 16 ft.*lbf) 

  2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade)  See step  2
  3. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)  See step  3
  4. INSTALL CENTER STOP LIGHT SET (w/ Rear Spoiler)  . Refer to INSTALLATION - Step 2
  5. INSTALL ROOF SIDE INNER GARNISH LH  . Refer to INSTALLATION - Step 26
  6. INSTALL ROOF SIDE INNER GARNISH RH  See step  6
  7. INSTALL REAR SEAT SIDE GARNISH LH  . Refer to INSTALLATION - Step 28
  8. INSTALL REAR SEAT SIDE GARNISH RH  See step  8
  9. INSTALL REAR DOOR SCUFF PLATE LH  . Refer to INSTALLATION - Step 37
  10. INSTALL REAR DOOR SCUFF PLATE RH  See step  10
  11. INSTALL BENCH TYPE REAR SEATBACK ASSEMBLY  . Refer to INSTALLATION - Step 1
  12. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY 
  13. INSTALL REAR SEAT HEADREST ASSEMBLY 
  14. INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY  . Refer to INSTALLATION - Step 4
scientia non olet · About LEMON Manuals