Fuel Sender Gauge Assembly: Installation: Installation

INSTALL FUEL SENDER GAUGE ASSEMBLY
1. Install the fuel sender gauge assembly by sliding it downward.
  
  Fig 1: Installing Fuel Sender Gauge Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  NOTE:
  Do not damage the wire harness.
2. Connect the connector of the fuel sender gauge assembly.
  NOTE:
  Make sure that the fuel sender gauge arm does not bend.
INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY See step 1
INSTALL FUEL SENDER GAUGE See step 20
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .
INSPECT FOR FUEL LEAK . Refer to ON-VEHICLE INSPECTION - Step 1
INSTALL REAR FLOOR SERVICE HOLE COVER See step 26
INSTALL NO. 2 REAR FLOOR SERVICE HOLE COVER See step 4
INSTALL NO. 3 ROOM PARTITION PAD See step 5
INSTALL REAR SEAT CUSHION ASSEMBLY . Refer to INSTALLATION - Step 4