LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2012 >> IS F >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Diagnostic Codes (P0010-P1178)) >> SFI System >> DTC P0101: Mass Air Flow Circuit Range / Performance Problem >> Typical Enabling Conditions
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Typical Enabling Conditions

Monitor runs whenever following DTCs not present None
Throttle position voltage 0.24 V or more, and less than 3.6 V
Time after engine start 5 seconds or more
Battery voltage 10.5 V or more
Engine coolant temperature 70°C (158°F) or more
Estimated load 30% or more, and less than 100%
Mass air flow meter circuit fail (P0102, P0103) Not detected
Intake air temperature sensor circuit fail (P0112, P0113) Not detected
Engine coolant temperature sensor circuit fail (P0115, P0117, P0118) Not detected
Crankshaft position sensor circuit fail (P0335, P0337, P0338) Not detected
Throttle position sensor circuit fail (P0120, P0121, P0122, P0123, P0220, P0222, P0223, P2135) Not detected
Canister pressure sensor circuit fail (P0452, P0453) Not detected
Leak detection pump fail (P2401, P2402) Not detected
Vent valve fail (P2419, P2420) Not detected