Installation

CRUISE CONTROL: DRIVING SUPPORT ECU: INSTALLATION

HINT
A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL DRIVING SUPPORT ECU





(a) Install the ECU with the nut.

NOTICE:
* Do not use an ECU which has been dropped or subjected to any strong shocks.
* During the removal and installation, do not remove the drip-proof cover.
* When a new ECU is installed, perform initialization.

2. INSTALL DASH PANEL EXTENSION LH





(a) Install the dash panel extension with the 2 nuts and bolt.

(b) Connect the connector.

(c) Attach the clamp.

3. INSTALL COWL SIDE TRIM BOARD LH Installation

4. INSTALL FRONT DOOR SCUFF PLATE LH Installation