Customize Parameters
- CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE) NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Customize Setting/
- Select the setting by referring to the table below.SEAT
Display Default Contents Setting Slide Link Hdrest Length Ctrl Avail Function to control headrest to compensate for driver physique when driver seat is sliding. Avail/Not Avl Slide Link Cushion Length Ctrl Avail Function to control cushion length to compensate for driver physique when driver seat is sliding. Avail/Not Avl Seat Move Distance Standard Allows customizing of the seat movement distance for the power easy access system. OFF/Little/Standard