LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2012 >> LS 460 AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Service Information) >> HEATED OXYGEN SENSOR (For 2WD) >> On-Vehicle Inspection >> On-Vehicle Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

On-Vehicle Inspection

  1. INSPECT HEATED OXYGEN SENSOR 
    Fig 1: Identifying Heated Oxygen Sensor Connector
    GTY105468Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the heated oxygen sensor connector.
    2. Measure the resistance according to the value(s) in the table below.

      Standard resistance

      Tester Connection Condition Specified Condition
      1 (HT) and 2 (+B) 20°C (68°F) 11 to 16 Ω

      If the result is not as specified, replace the sensor.

scientia non olet · About LEMON Manuals