Dismounting/Mounting Procedures: Notes
CAUTION:
The tire should be dismounted from the wheel using the tire changer manufacturer's instructions. Use the following information to avoid damage during the dismounting/mounting procedures.
NOTE:
It is necessary to register the transmitter ID with the tire pressure warning ECU, when replacing the tire pressure warning valve and transmitter and/or tire pressure warning ECU. This system also requires initializing after changing tires or wheels or after rotating the tires. See RESET PROCEDURES .
NOTE:
If the negative battery terminal is disconnected, initialize the front power seat control system after the terminal is reconnected.
- Navigation System (for DVD)
- Advanced Parking Guidance System
- Power Trunk Lid System
- Rear Door Sunshade System